Changelog :

MODIFIED: merged with eMule 0.26b
ADDED: Save/Load sources [enkeyDEV(Ottavio84) -New SLS-]

Changelog :

+ADDED: Reconnect on lowID [Tarod] (fixed version)
ADDED: A4AF [Tarod] (fixed version)
ADDED: Disable Sources eXchange [Tarod]
ADDED: sends sources with LowID that are in same sever that client is requesting sources [Tarod]
ADDED: do not send incomplete established conns. to avoid sending no valid sources [Tarod]
ADDED: QueueSize 800...2000
ADDED: fakecheck Donkey-Fakes.de.vu + Jigle.com
BUGFIX: transfered - column (statistic-bug in dl-window)
BUGFIX: Auto-Pause (for example if you HD is full)
BUGFIX: show overhead bandwidth
MODIFIED: original emule LOWIDTOLOWID was tuned (now lower CPU load)
MODIFIED: original emule NNS-routine was disabled (now lower CPU load)

ADDED:
WebServer [eMule Plus]
password 5-12 chars

ADDED:
NNS-, FullQS-, HighQRS- and AutoHL-/NOP-Timer
you can set 0...3600 second

ADDED:
added column for Hard Limit,
variable Hard Limit with auto-function (50...1000, in- or decrease depend on priority of DL-file),
hard limit will be updated with 4th takt of Timer,
hard limit per file will be initiate with value from usual used hard limit in preferences
PRIORITY HIGH or AUTO[HIGH]:
Valid sources <= 50
if you have more then 20% realy needed sources(depend on NNS,FQS,HQRS) collected,
then increase you hard limit around 25%, otherwise decrease around 1%
Valid sources > 50
if you have more then 30% realy needed sources(depend on NNS,FQS,HQRS) collected,
then increase you hard limit around 20%, otherwise decrease around 1%
PRIORITY NORMAL or AUTO[NORMAL]:
Valid sources <= 150
if you have more then 50% realy needed sources(depend on NNS,FQS,HQRS) collected,
then increase you hard limit around 15%, otherwise decrease around 1%
Valid sources > 150
if you have more then 60% realy needed sources(depend on NNS,FQS,HQRS) collected,
then increase you hard limit around 10%, otherwise decrease around 1%
PRIORITY LOW or AUTO[LOW]:
Valid sources <= 500
if you have more then 75% realy needed sources(depend on NNS,FQS,HQRS) collected,
then increase you hard limit around 5%, otherwise decrease around 1%
Valid sources > 500
if you have more then 85% realy needed sources(depend on NNS,FQS,HQRS) collected,
then increase you hard limit around 1%, otherwise decrease around 1%

ADDED:
auto-drop NNSources only from DL Queue,
you can set minimum = 10%...90%,
you can set maximum = 50%...100%,
minimum <= maximum,
NNS Not Valid Src = waiting src + downloading src + not needed parts src,
auto starting the NNS-routine if NNS Not Valid Sources > MAX
auto stop the NNS-routine if NNS Not Valid Sources <= MIN
now before auto-drop and manual-drop, tring to swap to another file,
clean up -> depends on minimum values,
manual drops NNS have not restrictions (clean all NNS),
now with enableble BeepTon. (acoustic signal on droping NNS)

ADDED:
auto-drop Full Queue Sources only from DL Queue,
you can set minimum = 10%...90%,
you can set maximum = 50%...100%,
minimum <= maximum,
FQS Not Valid Src = waiting src + downloading src
auto starting the FullQS-routine if FQS Not Valid Sources > MAX
auto stop the FQS-routine if FQS Not Valid Sources <= MIN
clean up -> depends on minimum values,
manual drops FullQS have not restrictions (clean all FullQS),
now with enableble BeepTon. (acoustic signal on droping FQS)

ADDED:
Maximum allowed Remote Queue Rating <= X,
you can set 5...2000.

ADDED:
auto-drop HighQRSources only from DL Queue,
you can set minimum = 10%...90%,
you can set maximum = 50%...100%,
minimum <= maximum,
HQRS Not Valid Src = waiting src + downloading src,
auto starting the HighQRS-routine if HQRS Not Valid Sources > MAX
auto stop the FQS-routine if HQRS Not Valid Sources <= MIN
clean up -> depends on minimum values,
manual drops HighQRS have not restrictions (clean all HighQRS),
now with enableble BeepTon. (acoustic signal on droping HQRS)

NOTICE:
Timer: value in seconds. Timer = 30sec, that mean checking MAX-limits are happen every 30sec, and start
only one NNS- or FQS- or HQRS-routine at the same time. for example: if NNS-routine started, then next
start of NNS-routine is in 2 mins(30sec+30sec+30sec+30ec=2 mins periode). if you have one
of NNS, FQS or HQRS disabled, then you have reduced you periode at 30sec too.
NOP = no operations (do nothing)
NNS Not Valid Sources = waiting src + downloading src + not needed parts src
FQS Not Valid Sources = waiting src + downloading src
HQRS Not Valid Sources = waiting src + downloading src
FQS Valid Sources = waiting src + downloading src - full queue src - high queue rating src
HQRS Valid Sources = waiting src + downloading src - full queue src - high queue rating src